Magewell Pro Capture Quad SDI
Normal-profile PCIe Gen2 x4 card that allows for capturing 4 channels of SDI input
Normal-profile PCIe Gen2 x4 card that allows for capturing 4 channels of SDI input
Normal-profile PCIe Gen2 x4 card that allows for capturing 4 channels of SDI input
The Magewell Pro Capture Quad SDI is a PCIe 2.0 capture card for HD Video. It supports 4x SD/HD/3G-SDI inputs.
Features:
PCIe 2.0
Capture 2k x 2k
Compatible with Windows
Compatible with Linux
Up/Down Scaling
Deinterlacing
Multiple Streaming
Automatically detecting input signal
High fidelity video processing pipeline
Color adjustment
Various output color spaces
SG-DMA transmission mode
Multiple devices on one host
Hardware time stamp
Mounting hole
Rotary switch
High-speed memory
LED indicator
Firmware upgrade
Common driver
Continuously work for 24h x 7
Supported OS
Windows 7/8/8.1/2008 R2/2012 (x86 & 64)
Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture)
Supported APIs
Windows (DirectShow, DirectKS, Wave API/DirectSound/WASAPI)
Linux (V4L2, ALSA)
Supported Software
VLC
VirtualDub
OBS
xSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow/V4L2 encoding/streaming software
Input Interfaces:
4x BNC (SD/HD/3G SDI)
Output Interfaces
PCIe Gen2 x4
Input Features
Support for input video resolutions up to 2048×2048 pixels
SDI Specific Features
Integrated cable equalizer supporting cable lengths up to 230M for HD signals
Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards
Support for 2K (2048×1080) mode
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for 10/12-bit color depth
Support for extraction of SMPTE 352 payload identifier
Support for up to 8 audio channels at 48KHz
Support for extraction of audio formation information & channel status data
Limited support of 3Gb-DS: only the first stream can be captured
Limited support of 3Gb-DL: (2K YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60, Other modes: full supported)
Limited support for capture of the first link of dual link interfaces:(YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60, YCbCr 4:4:4 10-bit: captured as 4:2:2, RGB 4:4:4: R/B sub-sampled)
Video Output Formats
Support for output image resolutions up to 2048×2048 pixels
Support for output frame rates up to 120fps. (Actual output frame rate can be limited by PCIe bandwidth, and at higher image resolutions – above 1280×1024 – by the pixel clock of the on-board video processing hardware. eg. Max frame rate at 1920×1080 = ~80fps. )
Support for 4:2:0 8-bit output formats: NV12, I420, YV12
Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY
Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32
Support for 4:4:4 10-bit output formats: V410, Y410
More output formats are supported via Pro Capture SDK for DirectKS
Video Processing Features
Two video processing pipelines with ~180Mpixels/s processing bandwidth for each one
Full 10-bit video processing
Video cropping
Video scaling
Video de-interlacing (Wave, Blend top & bottom field, Top field only, Bottom field only)
Video aspect ratio conversion (Auto or manual selection of input aspect ratio, Auto or manual selection of output aspect ratio, Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox))
Video color format conversion (Auto or manual selection of input color format & quantization range, Auto or manual selection of output color format, quantization range & saturation range, Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats, Support for Limited or Full quantization range, Support for Limited, Full & ‘Extended gamut’ saturation range)
Video frame rate conversion
Video OSD composition (Support for PNG OSD image (up to 2048×2048), Support for dynamic loading of RGBA OSD image via SDK)
Multiple Cards per System
Support for multiple cards plugged to one system
On-board rotary switch to set card number, with 16 positions from 0 to F
System hardware device tree will display “01: Pro Capture AIO” when rotary switch is set to 1, and so on
The video and audio device names displayed in your software will include the card number (set by the rotary switch)
Multiple Output Streams
Unlimited output streams for any one input channel
Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream
Ultra Low Latency Support
Latency of 64 video lines
Partial notification mode in SDK
Timestamp & A/V Synchronization
Hardware based 100ns high resolution clock
Audio frames (192 audio samples) & video frames are stamped with hardware clock
Hardware clock can be synchronized across cards (via SDK)
Video Output SG-DMASwitch
~400MB/s per channel DMA bandwidth in PCIe 2.0 system
~200MB/s per channel DMA bandwidth in PCIe 1.0 system
Support for auto detection of Intel tiled GPU surface
Support for DirectGMA for AMD video adapter chipsets
Support for GPUDirect for Nvidia video adapter chipsets
SDK
Pro Capture SDK for DirectShow for easy integration (Windows)
Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)
Windows Driver Tweaks
All options can be controled by three levels of registry key: global level, product level and device level
Video, Audio, Crossbar filter names can be customized via registry keys
Firmware Upgrade
Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
LED Indicator
Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.
Form Factor
Normal profile PCIe x1 Add-on Card
112.15mmx102.92mm (without PCI bracket)
Power Consumption
Max current at 12V ~0.6 A
Max current at 3.3V ~2.4 A
Max power consumption ~14.3 W
Working Environment
Operating temperature: 0 to 40 deg C
Storage temperature: –20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing
UPC: 0814395020365